PPG-SEMCO® Aerospace 3/16" Rivet Hole Dispensing Nozzle | White | 1 Unit / Box
Precision-Engineered for Aerospace Sealant Application
Consistent sealant delivery for rivet hole sealing in commercial and military aircraft assembly.
|
✈️
|
Aerospace 3/16" Rivet Hole Dispensing Nozzle | White | 1 Unit / Box
The PPG-SEMCO® 3/16" rivet hole dispensing nozzle has a 3/16" (4.76 mm) tip diameter for rivet hole sealing in commercial and military aircraft. It is designed for standard Semco® cartridge dispensing systems.
|
The PPG-SEMCO® 3/16" Rivet Hole Dispensing Nozzle is an aerospace sealing solution with a precision-machined 3/16" (4.76 mm) tip diameter, sized for larger rivet hole dimensions in commercial and military aircraft. It is designed to help deliver consistent, repeatable sealant application during assembly.
⚠️ Safety Notice: Always follow applicable aerospace safety protocols and manufacturer guidelines when using dispensing equipment. Verify nozzle compatibility with your specific sealant viscosity and dispensing system before operation.
At a Glance
|
|
4.76 mm
Metric Equivalent
|
Commercial & Military
Aircraft Assembly
|
Technical Specifications
| Specification |
Detail |
| Brand |
PPG – Semco® |
| Product Type |
Rivet Hole Dispensing Nozzle |
| Color |
White |
| Tip Diameter |
3/16 inch (4.76 mm) |
| Application |
Aerospace rivet hole sealing, commercial and military aircraft |
| Compatible With |
Standard Semco® cartridge dispensing systems |
| Pack Quantity |
1 Unit / Box |
Key Features & Benefits
✈️ Rivet Hole Fit
The 3/16" (4.76 mm) precision-machined tip is sized for the rivet hole dimensions used in commercial and military aircraft assembly.
🛡️ Sealant Coverage for Corrosion Protection
Designed to help place the sealant volume each rivet hole needs, supporting corrosion protection and structural integrity.
💨 Flow Geometry
Flow geometry is designed to reduce common dispensing issues such as air entrapment, inconsistent fill, and material waste.
🔁 Consistent Production Use
Built for repeatable application in high-volume production environments.
⏱️ Less Over-Application
Controlled sealant delivery can reduce over-application, rework, and material waste on large assembly runs.
Why Rivet Hole Sealing Precision Matters
|
⚠️ Under-Sealing Risk
Insufficient sealant in rivet holes can allow moisture ingress, which may lead to corrosion and structural degradation.
|
💸 Over-Application Cost
Excess sealant means wasted material, cleanup, and rework time.
|
✅ PPG-SEMCO® Solution
A tip sized for the rivet hole helps deliver the intended sealant amount for each hole.
|
Aerospace Applications
Commercial Aircraft Assembly
Military Aircraft Assembly
Rivet Hole Sealing
Corrosion Protection
Structural Sealant Application
Tips for Best Results
✓ Verify the rivet hole diameter matches the 3/16" nozzle tip before starting production.
✓ Confirm the sealant viscosity is compatible with the nozzle before high-volume application.
✓ Inspect the nozzle tip before each use and replace it if damage or deformation is found.
✓ Cap cartridges immediately after use to help prevent sealant curing.
✓ Nozzles are single-use. Do not reuse.
The PPG-SEMCO® Aerospace 3/16" Rivet Hole Dispensing Nozzle is white and has a 3/16" (4.76 mm) tip for aerospace rivet hole sealing. It is compatible with standard Semco® cartridge dispensing systems. Sold 1 unit per box.
Legal Notice: All recommendations, statements, and technical data contained herein are based on tests believed to be reliable and correct, but accuracy and completeness are not guaranteed and are not to be construed as a warranty, either expressed or implied. User shall rely on their own information and tests to determine suitability of the product for the intended use and assumes all risks and liability resulting from use of the product.
Usage Notice: The PPG-SEMCO® Aerospace 3/16" Rivet Hole Dispensing Nozzle is single-use. Always follow applicable aerospace safety protocols and manufacturer guidelines. Verify nozzle compatibility with your sealant viscosity and dispensing system before operation. Inspect the nozzle for damage or blockage before installation. Specifications subject to change without notice.
Semco®, Semkit®, and PPG-SEMCO® are registered trademarks of PRC-DeSoto International Inc. and PPG Industries, registered with the U.S. Patent Office.